| Patient Education |
|
Click here for patient education.
|
|
You are in: eMedicine Specialties >
Clinical Procedures > Musculoskeletal Procedures
Splinting, Posterior Elbow
Article Last Updated: Oct 30, 2007
AUTHOR AND EDITOR INFORMATION
Section 1 of 14  
Author: Kenneth R Chuang, MD, Attending Physician, Emergency Department, Long Beach Memorial Medical Center and Miller Children's Hospital
Coauthor(s):
Lynne McCullough, MD, FACEP, Associate Professor of Medicine and Emergency Medicine, Geffen School of Medicine at UCLA; Medical Director, Westwood Emergency Department
Editors: Erik D Schraga, MD, Consulting Staff, Permanente Medical Group, Kaiser Permanente, Santa Clara Medical Center; Mary L Windle, PharmD, Adjunct Assistant Professor, University of Nebraska Medical Center College of Pharmacy, Pharmacy Editor, eMedicine.com, Inc; Rick Kulkarni, MD, Medical Director, Assistant Professor of Surgery, Section of Emergency Medicine, Yale-New Haven Hospital
Author and Editor Disclosure
Synonyms and related keywords:
posterior long arm splint, long posterior arm splint, posterior elbow splint, splinting, elbow fracture, broken elbow, broken posterior elbow, elbow splint, plaster, thermal burns, pressure sores, splint itch
Splints are generally applied to decrease movement to provide support and comfort through stabilization of an injury. In the emergency department (ED), splints are primarily used to stabilize nonemergent injuries to bones until the patient can be evaluated by a consultant such as an orthopedic surgeon, at which time definitive casting can be performed.1 Splints can also serve as initial immobilization in the presurgical period or can immobilize an injury for primary healing. All patients with injuries that are splinted should be referred for evaluation by a consultant in a timely fashion (within 2-3 days).
A posterior elbow splint is primarily used to stabilize the following injuries:
- Fractures or soft tissue injuries of the elbow
- Fractures or soft tissue injuries of the proximal radius or ulna
- Although no true contraindications exist to the placement of a splint, certain injuries require immediate evaluation or intervention by a consultant (eg, orthopedic surgeon, hand surgeon, plastic surgeon) and, as such, may not necessitate splinting. Such injuries include the following:
- Complicated fractures
- Open fractures
- Injuries with associated neurovascular compromise
Splinting is usually tolerated without the use of anesthesia. However, if significant manipulation or reduction of the injury is required during the splinting process, anesthetic techniques may be used. Acceptable techniques include the following:
- Administration of a hematoma block or nerve block
- Procedural sedation with appropriate monitoring and administration by an experienced physician (For more information, see Procedural Sedation.)
- Administration of oral or intravenous pain medications, including nonsteroidal anti-inflammatory drugs (NSAIDs) or opioid analgesic agents
With the administration of any analgesic agent or the initiation of a formal sedation protocol, care should be taken to avoid oversedation. A complete neurovascular examination should be performed before and after the splint has been applied.
- Stockinette
- Padding (eg, Webril)
- Ready-made plaster or fiberglass splinting material (eg, plaster of Paris), 8-10 sheets, 6 inches wide (can use 4-inch plaster for smaller patients)
- Bandage or wrap (eg, Bias bandage or Ace wrap), 3-4 inches wide
- Clean, room-temperature water in a basin
- Trauma shears or a pair of medical scissors without pointed ends
- Chux pads and bed sheet
- Tape (if using Bias bandage) or bandage clips (if using non-Velcro Ace wrap)
- Sling
- Plaster or prefabricated fiberglass splint material
Equipment for splint. Image courtesy of Kenneth R. Chuang, MD.
- Place the patient in a comfortable position (eg, seated or reclined).
- Cover the patient with a sheet to avoid splatter from the wet plaster.
Cover patient appropriately. Video courtesy of Kenneth R. Chuang, MD. - Completely expose the injured limb. Remove any tight-fitting clothing on the affected extremity that would otherwise have to be removed with scissors after the splint is placed. Jewelry should be removed. In particular, rings can cause constriction and ischemia of the fingers with delayed swelling of the soft tissues. If unable to remove a ring, try using soap as a lubricant or consider a ring cutter.
Remove jewelry and rings to avoid ischemia from swelling. Video courtesy of Kenneth R. Chuang, MD.
- Explain the procedure to the patient, including risks and benefits. Obtain informed consent.
- Position the patient as described above. See Positioning.
- Apply stockinette. The stockinette should extend from the proximal humerus to beyond the fingertips. Cut an adequate hole for the thumb, being careful to avoid constriction of the thumb. When measuring the stockinette, cut longer than the splint. The stockinette should extend 2-3 cm beyond the overlying padding on either end. In turn, the padding should extend 2-3 cm beyond the overlying wet plaster on either end. Together, the stockinette and padding should be pulled over the edges of the wet plaster to create smooth edges.
Stockinette application for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. - Wrap the padding (eg, Webril) over the stockinette. Begin proximally and wrap distally, overlapping each layer by half the width. Also allow for extra length. The padding should extend 2-3 cm beyond the overlying plaster on both ends. Smooth out creases and avoid wrinkles, unwrapping and rewrapping as necessary. Apply extra padding to the bony prominences and epicondyles of the elbow, to the bony prominences of the wrist, to the metacarpophalangeal joints, and to the base of the thumb.
Cotton padding application for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. - Measure the plaster. For the average-sized adult, plaster for the posterior elbow splint should be 8-10 layers thick. Use plaster that is 3-4 inches wide. With a roll of dry plaster, measure the first layer of plaster from the ulnar side of the hand at the level of the mid metacarpals (or palmar crease), extending proximally along the ulnar side of the forearm to the proximal humerus. Allow for roughly 5 mm of extra length on either end, as plaster shrinks when wet. Then, with the desired length pinched off, fold over the plaster. Begin unrolling the plaster and folding until the splint is 8-10 layers thick.
Measuring dry plaster for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. - If using prefabricated fiberglass, the stockinette and padding steps can usually be skipped. In such cases, follow the manufacturer recommendations.
- Submerge the plaster in clean, room-temperature water. Allow all the bubbles to escape. This starts the lamination process of the plaster and allows the layers to bond together. Squeeze out the excess water. With the fingers, pull out remaining water. Then, lay the plaster on a flat surface or dry towel and smooth out wrinkles and folds. This allows for further bonding of the plaster layers.
Wetting the plaster for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. - Position the affected arm with the palm facing toward the body, and the elbow in 90 degrees of flexion. Apply the wet plaster over the padding, from the ulnar side of the hand at the level of the mid metacarpals, covering proximally along the ulnar side of the forearm to the proximal humerus. At this point, someone other than the person applying the splint needs to hold the distal end of the wet plaster as the plaster is applied proximally. The patient may be able to do this with his or her other hand; if not, an assistant must be used. Fold outward the excess plaster on the ends. The underlying stockinette and padding should then be folded outward on both ends, creating smooth edges. The splint should start distal to the wrist to prevent a wrist flexor contracture or wrist drop.
Applying wet plaster for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. - Apply the bandage wrap over the wet plaster. Start distally and wrap proximally. Avoid wrapping too tightly. Cut an adequate hole for the thumb.
Applying bandage wrap for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD - While the plaster is still wet, mold the splint into the desired shape. The elbow should be in 90 degrees of flexion. The wrist and hand should be in a neutral position. Extend the wrist to 20 degrees and abduct the thumb. The hand, wrist, forearm, and elbow should remain immobile until the splint is dry. Advise the patient that he or she may feel some warmth released from the plaster as it dries. However, if the heat becomes too intense, unwrap the splint and remove the plaster immediately. Thermal burns can occur.2
Molding the posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. - Check neurovascular function after the splint has dried. Recall that the median nerve provides sensory function to the palmar side of the thumb; to the palmar side of the second, third, and lateral half of the fourth digits; and, dorsally, to the distal half of the second and third digits and the lateral half of the fourth digit. The ulnar nerve provides sensory function to the palmar and dorsal aspects of the fifth digit and the medial half of the fourth digit. The radial nerve provides sensory function to the dorsal surface of the hand and to the web space between the first and second digits. Assess motor function, as well. Peripheral vascular assessment can be accomplished by checking capillary refill. Wipe away any plaster that may have dropped onto the patient's skin.
Test neurovascular function and capillary refill. Video courtesy of Kenneth R. Chuang, MD. - Place the patient's affected arm in a sling. Instruct the patient to use the sling to increase stability and decrease pain with movement. However, when the patient is at rest, the sling should be removed and the arm elevated.
- Deliver appropriate aftercare instructions
- Instruct the patient to rest, elevate, and ice the injured limb.
- Instruct the patient to remove the splint and return immediately, or go to an ED, if he or she experiences weakness or numbness, color change (pale or bluish), increasing pressure or pain, or spreading redness or streaking.
- The splint must be kept clean and dry.
- Patients can be tempted to use sticks, pens, or hangers to scratch an itch. Advise the patient that sticking objects into the splint can wrinkle the padding and lead to pressure sores or cause a break in the skin and lead to an unattended infection.
- The splint should be rechecked in 48 hours. Also, arrange for follow-up with a consultant, usually in 2-3 days.
- If the patient received any sedation or opioids, advise against driving or alcohol consumption.
Posterior elbow splint. Image courtesy of Kenneth R. Chuang, MD.
- To assist in achieving neutral position of the hand and wrist, some physicians advocate having the patient hold a can or a bandage wrap. Alternatively, the patient can imagine holding a wine glass. With either method, maintain the wrist at 20 degrees extension.
- For injuries or reductions that require shorter drying times, faster-setting plaster is available (eg, Specialist Extra Fast Setting Plaster, which sets in 2-4 min). However, as the plaster dries faster, the risk of thermal injury increases. For most splints, regular plaster (eg, Specialist Fast Setting Plaster, which sets in 5-8 min) is appropriate.
- Consider prescribing diphenhydramine (Benadryl) or another antihistamine for itching. However, if the itching persists or worsens, evaluate the splint for complications.
- Thermal burns: Patients can expect some warmth as the plaster dries. However, if they report intense heat or any pain, remove the plaster immediately.
- As more layers of plaster are used, more heat is produced.
- Use clean, room-temperature water. Water that is dirty or too warm accelerates the drying time and increases the heat produced.
- Do not wrap towels or blankets around the splint to shorten drying time. This produces excess heat.
- Pressure sores: Provide extra padding to bony prominences. When wrapping the cotton padding, avoid creases. When creases occur, smooth them out or unwrap and rewrap as needed. When molding the wet plaster, use broad-based pressure. In other words, do not use the fingertips; rather, use the entire palmar surface of the hands and fingers.
- Contact dermatitis: See Contact Dermatitis.
- Ischemia and neurovascular compromise: These complications may result from increased pressure from swelling. If moderate to significant swelling is anticipated, cut the cotton padding lengthwise along the lateral or radial side of the forearm before applying the wet plaster to the medial side. This allows for expansion of the padding. Also, if using tape to secure the outermost bandage wrap, do not tape circumferentially.
- Decreased range of motion from immobilization: Advise the patient that, depending on the extent and nature of the initial injury, he or she can often expect long-term pain, arthritis, stiffness, and decreased range of motion, despite best care practices. The aftercare of such injuries often requires physical therapy.
MedlinePlus: Elbow Injuries and Disorders
Special thanks to Dr. Iris Gluzman and Mrs. Leni L. Chuang.
| Media file 1:
Equipment for splint. Image courtesy of Kenneth R. Chuang, MD. |
|  View Full Size Image | |
Media type: Photo
|
| Media file 2:
Cover patient appropriately. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 3:
Remove jewelry and rings to avoid ischemia from swelling. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 4:
Stockinette application for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 5:
Cotton padding application for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 6:
Measuring dry plaster for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 7:
Wetting the plaster for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 8:
Applying wet plaster for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 9:
Applying bandage wrap for posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD |
| View Full Size Image | |
Media type: Presentation
|
| Media file 10:
Molding the posterior elbow splint. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 11:
Test neurovascular function and capillary refill. Video courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Presentation
|
| Media file 12:
Posterior elbow splint. Image courtesy of Kenneth R. Chuang, MD. |
| View Full Size Image | |
Media type: Photo
|
- Howes DS, Kaufman JJ. Plaster splints: techniques and indications. Am Fam Physician. Sep 1984;30(3):215-21. [Medline].
- Kaplan SS. Burns following application of plaster splint dressings. Report of two cases. J Bone Joint Surg Am. Apr 1981;63(4):670-2. [Medline].
- Chudnofsky C, Byers S. Splinting techniques. In: Roberts J, Hedges J. Clinical Procedures in Emergency Medicine. 4th ed. Philadelphia: WB Saunders Company; 2004:989.
- Menkes J. Initial evaluation and management of orthopedic injuries. In: Tintinalli J, Kelen G, Stapczynski J. Emergency Medicine: A Comprehensive Study Guide. 6th ed. New York: McGraw-Hill; 2003:1651.
Splinting, Posterior Elbow excerpt Article Last Updated: Oct 30, 2007
Topic originally published: Oct 30, 2007
|
