Arsine Poisoning

Updated: Feb 23, 2023
  • Author: Kermit D Huebner, MD, FACEP; Chief Editor: Duane C Caneva, MD, MSc  more...
  • Print
Overview

Practice Essentials

Arsine, the most toxic form of arsenic, is often produced from the reduction of inorganic arsenic salts with the use of acids and metal cofactors such as zinc. [1]  Possible sources of occupational exposure are many, including microchip production in the semiconductor industry and other industries in which workers are involved in galvanizing, soldering, etching, and lead plating. Arsine may also be produced inadvertently by mixing arsenic-containing insecticides and acids.

Arsine has some properties that may make it useful as a chemical warfare (CW) agent [2] ; it is a colorless, odorless, nonirritating gas that is 2.5 times denser than air. At concentrations above 0.5 ppm, a garliclike odor may be noted; however, arsine is toxic at much lower concentrations.

Once in the body, arsenic is readily distributed, with peak serum levels occurring in approximately 60 minutes. Excretion of arsenic occurs mostly by the kidneys, with excretion in sweat, feces, and bile in small amounts. [3]

Although it has been investigated as a CW agent, no battlefield use of arsine has been documented. During and prior to World War II, the British studied this agent and rejected its use in the field. They concluded that arsine was more than 10 times less toxic than phosgene (CG) and was both difficult to manufacture and highly flammable. Although arsine was determined not to be useful as a battlefield CW agent, concern exists that it may be useful as a small-scale weapon of assassination or terror.

In contrast, several arsine-derived organoarsenic compounds have been developed and used as CW agents, including lewisite (beta-chlorovinyldichloroarsine), adamsite (diphenylaminearsine), Clark I (diphenylchlorarsine), and Clark II (diphenylcyanoarsine).

For patient education information, see the  First Aid and Injuries Center, as well as Chemical Warfare and Personal Protective Equipment.

Next:

Pathophysiology

Inhaled arsine gas is distributed rapidly and causes massive red blood cell hemolysis that can potentially lead to global cellular hypoxia. The exact mechanisms leading to hemolysis have not been fully elucidated, but oxidative cell lysis has been suggested.

A study of mice exposed to moderate-to-high levels of arsine for 90 days revealed a significant decrease in hemoglobin and hematocrit along with an increase in mean corpuscular hemoglobins and mean corpuscular hemoglobin concentrations after 5 days of exposure. [4] Blood collected at 15 and 90 days showed a less severe anemia but a greater increase in mean corpuscular volumes and absolute reticulocyte count indicating a regenerative response. At 90 days, the concentration of methemoglobin was increased along with an increase in intracellular denatured proteins, or Heinz bodies. In addition, this particular study determined that arsine gas significantly depletes reduced intracellular glutathione resulting in greater oxidative damage to red blood cells.

Other mechanisms of hemolysis may include the inhibition of catalase and the formation of reactive oxidative species (ROS), such as hydrogen peroxide, within the cell. The damage induced by free radicals causes the denaturing of hemoglobin. This ultimately is believed to promote an abnormal association of hemoglobin with the erythrocyte membrane proteins that increase fragility of the erythrocyte membrane. Many researchers believe that hemolysis is a direct result of an arsenic dihydride intermediate and elemental arsenic produced from oxidized arsine. While there is disagreement of the reactive species involved and the mechanism of destruction, it is plausible that arsine causes cellular destruction by multiple mechanisms and the oxidative pathophysiology of arsine is well supported.

To further support an oxidative mechanism, human blood exposed to arsine pretreated with a sulfahydryl inhibitor N-ethylmaleimide (NEM) in vitro, resulted in less hemolysis. These results suggest that arsine may negatively interact with membrane sulfahydrl groups resulting in ion membrane changes that ultimately lead to hemolysis. [5]

Interestingly, the oxidative cytotoxicity potential of arsenic has been used as treatment for certain malignant cancers. In treating malignant melanoma, a widely known oxidant named menadione was used in combination with arsenic to increase reactive oxidative species (ROS) production and subsequent apoptosis in tumor cells. The two were found to work synergistically with a significantly higher level of apoptosis in the group treated with arsenic. [6] Similarly patients with acute promyelocytic leukemia (APL) were treated with transretinoic acid and arsenic trioxide. Compared to control, the group treated with the combination yielded a high complete remission rate of 93% and a significantly shorter time to enter complete remission. [7]

In due course, with massive hemolysis, acute kidney injury due to tubular destruction is an important sequelae of arsine toxicity. [8] Although arsine may have direct effects on the renal system, most of the damage is believed to result indirectly from the breakdown of red blood cells and the increased load of hemoglobin. As in rhabdomyolysis, this destroys the tubular network leading to kidney failure and is further complicated by renal hypoxia secondary to the decreased oxygen capacity of the blood.

Previous
Next:

Etiology

Arsine gas is used in the semiconductor industry when depositing arsenic on microchips. Exposure also may occur from producing, cleaning, or reclaiming gallium arsenide wafers.

Arsine is released during the (usually accidental) production of hydrogen in an acid medium in contact with arsenic-contaminated metals.

Arsine may potentially be used as a chemical warfare agent.  Suspect arsine exposure if multiple victims present in a delayed fashion with hematuria, abdominal or flank pain, and jaundice.

Previous
Next:

Epidemiology

Mortality/Morbidity

Arsine has been reported to cause immediate death at 150-250 ppm. In addition to absolute concentration, the duration of exposure is another factor that determines toxicity. Exposure to 25-50 ppm for 30 minutes or 100 ppm for less than 30 minutes may also result in massive red blood cell hemolysis and ultimately death. Symptoms may be noticed with concentrations as low as 0.15 ppm, and delirium may be seen at 10 ppm.

Most of the reported deaths are believed to have been secondary to acute renal failure. Of arsine-induced renal failure cases, 100% were fatal prior to the advent of hemodialysis. More recent mortality rates for patients with acute arsine toxicity report death in approximately 25% or less of reported cases.

Occupational exposure to arsenic has been linked to increased risk of melanoma. [9]

Previous
Next:

Prognosis

Patients who reach medical attention should survive with supportive medical care. Historically, patients who developed renal failure had 100% mortality. More recent (but still dated) studies report a mortality rate from arsine poisoning of approximately 25%.  Possible complications include the following:

Overwhelming exposures cause rapid death from massive hemolysis; in those who survive acute exposures, most deaths occur from renal failure.

Patients who survive acute arsine exposure may develop chronic arsenic toxicity, including anemia and peripheral neuropathy.

Previous